Can microcement be applied over existing tiles?

Yes, where the existing tiles and underlying surface are suitable. We assess their condition and the preparation required before recommending an overlay. Keeping existing tiles may reduce removal work, but this needs to be confirmed for each project.

Is microcement suitable for bathrooms and showers?

Yes, when the appropriate microcement system is installed over a correctly prepared surface with suitable waterproofing. The decorative finish should not be treated as a replacement for the required waterproofing system. We assess the wet-area requirements before recommending an approach.

How much does microcement cost in Auckland?

Pricing depends on the surface area, existing condition, access, detailing and selected system. Send us measurements, photographs or plans so we can understand the scope and provide a tailored quote.

Can microcement crack?

Movement in the underlying surface can lead to cracking. Stable substrates, correct preparation and appropriate treatment of joints help reduce this risk. We assess the existing surface and discuss any concerns before application.

Can I see the colour and texture before application?

Yes. Once your quote is accepted, we create a custom sample for you to view in your own space and lighting. We confirm your chosen finish in writing before application begins. The sample establishes the agreed direction, with subtle variation expected in a hand-applied finish.

What can I expect when working with Surface Revival?

We help you understand the preparation, finish selection and application process, with clear communication throughout. Your chosen finish is confirmed in writing before application, and we document the preparation and application work.

How long will my microcement project take?

As a guide, allow 5–7 working days for areas up to 20 m² and around 7–9 working days for larger areas. Timing depends on the size, preparation, detailing and drying conditions. We confirm your project schedule before starting. Microcement is best scheduled as one of the final trades, after wet trades, ceilings and painting are complete. We coordinate remaining installations to protect your new finish. Curing time is additional to the application period.

How long does microcement take to cure?

Allow at least seven days after the final sealer coat before water contact or trade work on the finished surfaces. Do not use cleaning products during the first 14 days. For floors, we confirm when walking can begin based on the installed system. Full hardness develops over approximately 30 days. We provide care instructions to protect your finish during this curing period.

How do I clean and care for microcement?

Once the specified curing period has passed, clean with warm water and a suitable pH-neutral cleaner. Avoid abrasive pads, acidic cleaners, bleach and ammonia. Protect the finish from sharp objects, impact and direct heat. We provide care instructions at handover, including when cleaning can begin and how to protect your particular surface.

How do I request a microcement quote?

Send us your project location, approximate dimensions and any photos or plans. We’ll clarify any extra details and provide an initial price estimate. Prefer to talk it through? We can arrange a call or, where needed, a site visit and bring along our custom-made samples to explore colours and textures. If you’re happy with the estimate, we’ll confirm the scope and provide a detailed quote.

When should I involve Surface Revival in my project?

Get in touch during planning, even though microcement is usually applied near the end of the build. This gives us time to discuss surface preparation, finish selection and scheduling with you and your builder or designer. Early planning helps everyone understand what needs to be ready before application begins.

Microcement Auckland

Seamless microcement for bathrooms, floors, walls and architectural surfaces across Auckland. Applied over suitable existing substrates or prepared new surfaces, creating a refined finish with subtle texture.

Seamless surfaces, considered detail

Seamless microcement with natural texture for bathrooms, floors and walls. Surface Revival applies Cemher systems across Auckland, with careful preparation and a finish tailored to your space.

Where microcement works

Explore the surfaces and spaces we commonly apply microcement to.

Bathrooms and showers

Create a cohesive finish across suitable walls, floors and shower areas. We assess the substrate and wet-area requirements before recommending the right system.

Flooring

A seamless finish for living areas, hallways and commercial interiors, with preparation and system selection tailored to the existing surface.

Walls and feature surfaces

Add subtle texture and depth to interior walls, from understated finishes to more expressive architectural surfaces.

Benchtops and vanities

Create a coordinated finish across suitable vanities, benchtops and custom surfaces, with suitability assessed for everyday use.

Discuss your microcement project

Send us your project location, approximate dimensions, surface photos and inspiration images. We’ll help you explore suitable options and provide a tailored quote.

Request a Quote

Meet Kale , the person behind Surface Revival.

Our microcement work

Warm neutral microcement shower with a recessed niche and linear drain

Light microcement floor meeting dark timber bathroom cabinetry

Curved brass basin tap against a softly textured microcement wall

Surface Revival applicator hand-finishing a recessed microcement niche

Soft natural light on a microcement wall beside patterned fabric

Frequently Asked Questions

Yes, where the existing tiles and underlying surface are suitable. We assess their condition and the preparation required before recommending an overlay. Keeping existing tiles may reduce removal work, but this needs to be confirmed for each project.
Yes, when the appropriate microcement system is installed over a correctly prepared surface with suitable waterproofing. The decorative finish should not be treated as a replacement for the required waterproofing system. We assess the wet-area requirements before recommending an approach.
Pricing depends on the surface area, existing condition, access, detailing and selected system. Send us measurements, photographs or plans so we can understand the scope and provide a tailored quote.
Movement in the underlying surface can lead to cracking. Stable substrates, correct preparation and appropriate treatment of joints help reduce this risk. We assess the existing surface and discuss any concerns before application.
Yes. Once your quote is accepted, we create a custom sample for you to view in your own space and lighting. We confirm your chosen finish in writing before application begins. The sample establishes the agreed direction, with subtle variation expected in a hand-applied finish.
We help you understand the preparation, finish selection and application process, with clear communication throughout. Your chosen finish is confirmed in writing before application, and we document the preparation and application work.
As a guide, allow 5–7 working days for areas up to 20 m² and around 7–9 working days for larger areas. Timing depends on the size, preparation, detailing and drying conditions. We confirm your project schedule before starting.
Microcement is best scheduled as one of the final trades, after wet trades, ceilings and painting are complete. We coordinate remaining installations to protect your new finish. Curing time is additional to the application period.
Allow at least seven days after the final sealer coat before walking on the floor, exposing the surface to water or allowing trade work on the finished areas.
Do not use cleaning products during the first 14 days.
Full hardness develops over approximately 30 days. We provide care instructions to protect your finish during this curing period.
Once the specified curing period has passed, clean with warm water and a suitable pH-neutral cleaner. Avoid abrasive pads, acidic cleaners, bleach and ammonia. Protect the finish from sharp objects, impact and direct heat.
We provide care instructions at handover, including when cleaning can begin and how to protect your particular surface.
Send us your project location, approximate dimensions and any photos or plans. We’ll clarify any extra details and provide an initial price estimate.
Prefer to talk it through? We can arrange a call or, where needed, a site visit and bring along our custom-made samples to explore colours and textures.
If you’re happy with the estimate, we’ll confirm the scope and provide a detailed quote.
Get in touch during planning, even though microcement is usually applied near the end of the build. This gives us time to discuss surface preparation, finish selection and scheduling with you and your builder or designer.
Early planning helps everyone understand what needs to be ready before application begins.